Notification, is a Governmental Act, whereby an EU Member State informs the European Commission & all EU Member States, that a Certification Body, which fulfils the relevant requirements, has been designated to carry out conformity assessment according to an European Directive. Notification of Authorized Bodies and their withdrawal if so decided, are exclusive responsibility of the notifying EU Member State. The Member States, EFTA countries (EEA members) and other countries with which the EC has concluded Mutual Recognition Agreements (MRAs) and Protocols to the Europe Agreements on Conformity Assessment and Acceptance of Industrial Products (PECAs) have designated Notified Bodies, established per directive. Lists of Notified Bodies can be searched on the NANDO web site. The lists include the identification number of each notified body as well as the tasks for which it has been notified, and are subject to regular update. SiSi Ispezioni, since 01 June 2018, is also active in the Notified Bodies services market, through an affiliation with Swiss Approval authorized Notified Body, with the unique identification number 2221. The European Directives under which “SiSi Ispezioni”, is permitted to act in the European market on behalf of the affiliated Notified Body, are as following:
Pressure Equipment Directive 2014/68/EU. [The OLD 97/23/EC]
| Field of Inspection | Type of Inspection | Normative Regulations / Standrads /In house procedure Directive 2014/68/EU |
| Pressure equipment | Directive 2014/68/EU M.D. 74124/1431 (G.G. 2278/B/2016) | |
| Groups-Subgroups | Internal production control plus supervised pressure equipment checks at random intervals | Annex III, point 2, Module A2 |
| EU-Type examination – production type | Annex III, point 3.1, Module B | |
| EU-Type examination – design type | Annex III,point 3.2, Module B | |
| Conformity to type based on internal production control plus supervised pressure equipment checks at random intervals | Annex III, point 4, Module C2 | |
| Conformity to type based on pressure equipment verification | Annex III, point 9, Module F | |
| Conformity based on unit verification | Annex III, point 10, Module G | |
| Permanent joining for pressure equipment | Approval of permanent joining procedures | Annex I, 3.1.2 |
| Approval of permanent joining personnel | Annex I, 3.1.2 | |
| 1.2Vessels under pressure exposed to flame or other incoming heating which create danger for overheating. | ||
| 1.Shell boilers | EN 12953-1 to 13 | |
| 2.Water-tube boilers | EN 12952-1 to 13 | |
| 1.1.2 and 1.1.3 Metallic vessels not exposed to flame which contain liquids or gases or liquefied gases or solved gases | ||
| 1.1.4 Plastics Vessels | EN 13445-1 to 6 | |
| 1. Unfired pressure vessels | ASME VIII*, AD MERKBLATT* | |
| 1.3.1 and 1.3.2 Industrial metallic piping which contain liquids or gases or liquefied gases or solved gases | ||
| 1.3.3 Plastics Pipes | ||
| 1.Industrial Metallic piping | -EN13480-1 to 5 -ASME B31.1*,ASME B31.3*, ASME B31.4*, ASME B31.8* |
Simple Pressure Vessels Directive 2014/29/EU [The OLD 2009/105/EC]
| Field of inspection | Type of inspection | Normative Regulations / Standards / In house procedure Directive 2014/29/ΕU |
| Simple Pressure Vessels | Directive 2014/29/ΕU M.D. 46248/1008/2016 (G.G. 1339/B/2016) | |
| -EU-Type Examination | Annex II, point 1, Module B | |
| -Conformity to type based on internal production control plus supervised vessel testing | Annex II, point 2, Module C1 | |
| -Conformity to type based on internal production control plus supervised vessel checks at random intervals | Annex II, point 3, Module C2 | |
| -Conformity to type based on internal production control | Annex II, point 4, Module C | |
| ΕΝ286-1 |
Lifts Certification Directive 2014/33/EU [The OLD 95/16/EC]
| Field of inspection | Type of inspection | Normative Regulations / Standards / In house procedure Directive 2014/33/EU |
| Lifts 1. Hydraulic lifts 2. Electric lifts | -EU Type Examination of lifts -Final inspection of lifts -Conformity based on unit verification for lifts | Directive 2014/33/EU M.D. 39507/167/F.9.2/2016 (G.G. 1047/Β/2016) -Annex IVB , Module B -Annex V -Annex VIII, Module G EN 81-1: 1999+A3:2010 EN 81-2: 1999+A3:2010 |
Construction Products Regulation EU 305/2011
| Decision | Product family, product /Intended use | AVCP system | Technical specification | Body function |
| 97/555/EC | Cements, building limes and other hydraulic binders : • Common cements, including: -Portland cement, -Portland composite cements: Portland-slag cement, Portland-silica fume cement, Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement, -Blastfurnace cements, -Pozzolanic cements, -Composite cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products) | System 1+ | EN 197-1:2011 | Product Certification Body |
| 97/555/EC | Cements, building limes and other hydraulic binders : • Masonry cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products) | System 1+ | EN 413-1:2011 | Product Certification Body |
| 98/214/EC | Structural metallic products and ancillaries (1/4) : • Structural metallic sections/profiles: hot rolled, cold formed or otherwise produced sections/profiles with various shapes (T, L, H, U, Z, I, channels, angle, hollow, tubes), flat products (plate, sheet, strip), bars, castings, forgings made of various metallic materials, unprotected or protected against corrosion by coating (to be used in metal structures or in composite metal and concrete structures) | System 2+ | EN 10025-1:2004 EN 10219-1:2006 EN 15088:2005 | FPC Certification Body |
| 98/214/EC | Structural metallic products and ancillaries (2/4) : • Structural metallic construction members: finished metallic products such as trusses, girders, columns, stairs, ground piles, bearing piles and sheet piling, cut to size sections designed for certain applications, and rails and sleepers. They can be unprotected or protected against corrosion by coating, welded or not. (for uses in work’s frames and foundations) | System 2+ | EN 1090-1:2009+A1:2011 | FPC Certification Body |
Machinery EU Directive 2006/42 EC
| 2006/42/EC Machinery Directive | |||||||
|
|||||||
